Top of the range Elite Silencers
Fully Take-Apart or Sealed Units
The brand name Sub-Silent Suppressors and all its products, designs and modifications on this site are Registered as Patent Pending with the NZ Government Intellectual Property Register, and is also protected by the NZ Copyright Act 1994 - especially and exclusively Sub-Silent Suppressors with INBUILT MUZZLE BRAKE, DECI-DAMP sound deadener, BIO-TECH WET-FIRE suppressor design and material & MICRO-PATTERNING:- Effective from March 2008 & July 2009
Click photos for larger image
Elite silencers - for the shooter who demands perfection - to whom shooting isn't just a sport, it is a form of art.
Crafted and finished to perfection - I will work with you - to create a custom silencer matching both your rifle and personality.
Click photo for larger image
Fully take apart - or sealed unit - consisting of individual hand made Venturi suppression ports.
I put all my engineering precision and skill into each and every Elite silencer.
Click photo for larger image
All my suppressors are crafted with engineering precision, balance and mirror finish. However, these top of the line custom silencers have that extra finishing touch - and it shows. They are simply perfect in design, workmanship and finish.
I realise not everyone will have the need or finances to purchase an Elite silencer. But for those sportsmen who demand perfection - these precision works of art more than meet the need.
There isn't several hours work involved in crafting these suppressors - there is over 18 years of engineering experience!
Engineering Process
Every Elite silencer is crafted and engineered from high grade solid aluminum rod.
Aluminum is preferred above stainless or Kevlar - due to its ability to quickly absorb the hot gasses that are responsible for much of the noise experienced with rim-fire shooting. It works especially well with sub-sonic ammunition.
Every piece is precision hand-crafted - I do not use CNC or automatic lathe attachments.
This photo clearly shows the craftsmanship that goes into finishing the outer tube - threaded for end-cap as well as custom hand-grip.
End-cap, threaded and crafted with a Venturi reverse flow suppression spacer.
Perhaps I am a little biased - but I still appreciate the beauty and craft of this engineering art.
Each custom Venturi suppression spacer is double sided. On one side is a funnel shaped cone, that slots into a concaved recess in the spacer below, and in turn has a concave chamber at its other end.
Every Venturi spacer is hand crafted, starting with a solid blank, machined in steps and then finished with a file, sanded by hand and polished
Here is the spacer from above, in its finished form. Operating to a tolerance of 1/1000th of an inch - the final sizing is too precise for my precision lathe, and must be completed through careful buffing and polishing - resulting in a mirror finish.
The finished unit. I craft as many or as few spacers as are needed to obtain maximum suppression. Spacers should not be evenly spaced throughout the silencer, but need to be of different and usually decreasing size. In doing so, the owner is also able to fine-tune their silencer into a configuration that enables maximum efficiency and suppression.
Call back soon, and I will add streaming video of these custom Elite suppressors
Kind regards
Rev Rog :-)